Changing Your Navigation Settings - NorthStar 957 Operator's Manual

Changing your navigation settings

957 Operator's Manual, Rev. B
2. Enter the access code from your Northstar owner's card,
then press the ENTER key. The first character block of the
owner's message flashes.
3. Enter the message (up to two lines) you want to see when
you power-up the 957, then press the ENTER key.
Your message can be changed only by entering your
access code number and repeating the above procedure.
The 957 gives you three attempts at entering the correct
access code; after that, all operations freeze, requiring you
to turn power off, then turn it back on again to resume
functioning.
To access the 957's navigation options, press the STAR key
until you see the OPTIONS/SERVICE INFO screen.
Chapter 11 - Setting up your 957
Page 141