NorthStar 957 Operator's Manual page 103

957 Operator's Manual, Rev. B
Adding waypoints to the middle of a route
To add waypoints to the middle of a route:
1. Move the cursor to select the leg of the route where you
want to insert a waypoint.
2. Press the SPLIT LEG key, then move the cursor to the
existing waypoint or other location that you want to add
to the middle of the route. As you move the cursor, the
957 displays the new connecting route legs as dotted lines
to and from the new waypoint.
3. If you've selected an existing waypoint, press the INSERT
WAYPT menu key. If you've selected only a cursor posi-
tion, press the INSERT NEW WP menu key (in this case,
this waypoint is stored with a name similar to (0001), with
Chapter 7 - Understanding the Routes Function
Page 95