NorthStar 957 Operator's Manual page 101

957 Operator's Manual, Rev. B
2. Press the CURSOR PAD to select the route you want to
change, then press the EDIT menu key. The name of the
route is displayed on the EDIT ROUTE screen.
3. If you want to change the route's name, do so now.
If the message at the bottom of the screen says PRESS
ENTER TO CONTINUE (USING LIST), press the USE
CHART menu key to edit using the chart.
4. Press the ENTER key to display the EDIT ROUTE chart
screen showing the route you selected.
The direction of the route is indicated by a series of small
arrows in each leg, and the cursor is in the middle of the
screen. From here you can add waypoints to the begin-
ning, middle, or end of the route, as described below.
Chapter 7 - Understanding the Routes Function
Page 93