Setting Up The Chart Screen - NorthStar 957 Operator's Manual

Setting up the chart screen

Choosing the chart
details
957 Operator's Manual, Rev. B
The edges of other charts in the 957's built-in world atlas are shown, in
addition to those in your local cartridge. These edges are shown as black
or red dashed lines.
The lat/lon grid is labelled only when the chart is north-up.
To set up the display of data on the CHART screen, press the
CHART SETUP menu key (in either vessel or browse mode)
On the CHART SETUP/STATUS SCREEN you can set up the
details on the CHART screen, and adjust the 957's track
control.
To set up the chart details, press the CHART DETAIL menu
key to display the CHART DETAIL screen.
Chapter 4 - Using the Chart Screen
Page 45