Generator Assembly Installation - Yamaha EF3000iSE Service Manual

GENERATOR
4. Remove:
• Generator assembly 1
NOTE:
• Remove the magneto rotor together with the
stator coil assembly using the rotor puller 2.
• Fully tighten the tool holding bolts, making
sure that the tool body is parallel with the
magneto rotor.
SWL3270J
CAUTION:
The magnetic force of the magneto rotor is
very strong. Therefore, do not change the
position of the magneto rotor and stator
coil assembly during or after removal, oth-
erwise they may be damaged.
Rotor puller:

GENERATOR ASSEMBLY INSTALLATION

CAUTION:
Be sure to remove any oil or grease from
the tapered portion of the magneto rotor
using a cloth dampened with thinner.
1. Install:
• Generator assembly
2. Install:
• Stator coil assembly bolts 1
• Tubes
Stator coil assembly bolts:
NOTE:
Turn the magneto rotor until the stator coil
assembly bolts are visible though the holes in
the rotor, and then install the bolts 1.
SWL3480J
3-23
ENG
YU-33270-B, 90890-01362
10 Nm (1.0 m · kg, 7.2 ft · lb)