Base I/O Unit Connector Layout Drawing - Mitsubishi Electric MELDAS 600 Series Connection Manual

CHAPTER 5 CONNECTION OF I/O INTERFACE
5.2 Connection of Base I/O Unit

5.2.2 Base I/O Unit Connector Layout Drawing

The base I/O unit is used for connecting the servo amplifier, encoder, skip and remote I/O unit.
One unit is always required per control unit.
Base I/O unit
0 0
ENC1
SKIP
CF10 SV2 SV1
CR31
CF31 CF32
CF33 CF34
RI02 RI01 DCIN
：ADD ON PCB
49