4.2.4 Connection of PC Card (PCMCIA)
The PC card (PCMCIA) is inserted in the control unit from the top of the control unit. When inserting the
card, a space of 100 mm or more is required at the top of the control unit. To remove the card, press the
eject button.
53
Label attachment
(PC card specifications)
The PCMCIA I/F mounted on the control unit satisfies the following specifications.
Standards
No. of slots
PC card power supply (Vcc) : 5 V, 800 mA
Program power supply (Vpp) : 12 V, 120 mA
(Note 1) PC card thickness
Type I (3.3mm)
Type II (5.5mm)
Type III (10.5mm)
(Note 2) Limited to the 5V specification part (cannot be used with the 3.3V specifications)
CHAPTER 4 SYSTEM CONNECTION
4.2 Connection of Control Unit
48
105
85.5
76
Control unit
: PCMCIA_V2.1, JEIDA_4.2 compliance
: 2 slots
Up to two cards can be used
Only one card can be used
24
15
4