Alarm Functions - Heat Alarm Temperature For Rhcc Status (°C) - ABB SmartTouch B/stainless Product Manual

10.24.121 Alarm functions - Heat alarm temperature for RHCC status (°C)
Options:
The RHCC status object has a heat alarm bit. If the input temperature of the controller exceeds
the temperature set in this parameter, then the heat alarm bit is set in the status object. It is
reset when the temperature falls below the set temperature.
Product manual 2CKA001473B5343
KNX control elements and application parameters
Setting option between 20 - 70
Application "Internal RTC"
│270