Editing Control Elements; Delete Control Element - ABB SmartTouch B/stainless Product Manual

Commissioning of the KNX function via ABB DCA SmartTouch 10 (from
9.9

Editing control elements

After the parameterization of the control elements, further editing can be carried out, e.g. a
parameterized control element can be copied to additionally use it on a different operating page.
9.9.1

Delete control element

1. Open the "Navigation" tab in the library area.
2. Select an operating page in the tree structure.
– The page is displayed in the work area.
3. Select the control element in the page view.
– A red frame appears.
4. Click in the icon bar of the work area.
5. Click on "Delete".
– The control element is deleted from the page view.
Product manual 2CKA001473B5343
ETS5)
│103