Parameter Settings Channel - ABB SmartTouch B/stainless Product Manual

8.2.1.1

Parameter settings Channel

Fig. 31: Parameters of channel
Under the channel settings you can configure the settings described in the following.
Pos. Description
[1] Device name
An independent designation for the device can be allocated via the text field.
[2] Position
By tapping on the drop-down menu you can assign a position to the device in the
building structure you defined (e.g. assignment to a room on a certain floor).
[3] Room temperature sensor
The internal room temperature controller can be set by tapping on the button. You
can switch it on and off, set the actual temperature and specify the operating mode.
[4] Time programs
This overview displays all previously created time programs. The number after a time
program indicates how often the actuator is used in this time profile. Select a time
Product manual 2CKA001473B5343
Commissioning via ABB-free@home®
│55