ABB SmartTouch B/stainless Product Manual page 61

day [%]
Switch-off delay of display
Switch off the display when
the room is dark
■ Brightness level for
the interpretation as dark
Switch off after the start of
darkness
Using the proximity sensor
for switching the display
Sensitivity of proximity
sensor
Haptic feedback
Screensaver
Screen-saver mode
[2] Authorizations
Menu item "Authorizations" is used to specify whether a user with installer
authorization is required for the reconfiguration of the device.
In addition, you can nevertheless assign users with read rights the authorization to
switch this device.
[3] Information about the device
Listing of device information (device number, software version, etc.)
[4] Maintenance
You can start the device anew, read the device in again or reset it by tapping the
respective buttons.
Restart
■
Read device in again
■
Reset
■
Product manual 2CKA001473B5343
Commissioning via ABB-free@home®
via the -/+ buttons.
Notice: The parameter only functions when a
time profile with the application "LED day/night
switchover" is available. The device (channel)
must be linked with this application!
Specifying the time the device changes into the
idle state.
Specifying whether the display is to switch off
when the room is dark.
Specifying the brightness level from which the
brightness in the room is to be perceived as dark.
Specifying whether the display is to switch itself
off after the start of darkness.
Specifying whether the proximity sensor is to be
used for switching the display.
The parameter us used to specify the sensitivity
of proximity sensor.
The parameter is used to specify at which point
on the display the haptic feedback is to take
place.
Specifying the time at which the screen saver is
to be activated.
Specifying the form in which the screen saver is
to be displayed.
│61