ABB SmartTouch B/stainless Product Manual page 60

Abb. 34: Other settings - Part 3
Under "Other settings" you can configure the settings described in the following.
Pos. Description
[1] Parameters
User language
Acoustic feedback
Volume of acoustic
feedback [%]
Colour scheme
Brightness for switching to
dark mode
Activating automatic return
to the start page
Activating automatic return
to the start page [s]
Adjusting the brightness to
the ambient lighting
LED switch-on brightness
night [%]
LED switch-on brightness
Product manual 2CKA001473B5343
Commissioning via ABB-free@home®
User language in which the information is shown
on the display.
Activation or deactivation of acoustic feedback
when using the display.
The parameter us used to set the volume of the
acoustic feedback.
The parameter is used to set the colour scheme
from "Bright" to "Dark".
The parameter is used to specify the brightness
value from which the display switches over to
dark mode.
This parameter is use to activate or deactivate
the automatic return to the start page.
This parameter is used to set the the number of
seconds after which the display view changes
automatically to the start page.
By activating or deactivating the parameter, the
automatic adjustment of the display brightness to
the ambient brightness is activated.
Setting the LED switch-on brightness for night in
% via the -/+ buttons.
Notice: The parameter only functions when a
time profile with the application "LED day/night
switchover" is available. The device (channel)
must be linked with this application!
Setting the LED switch-on brightness for day in %
│60