Product Overview - ABB SmartTouch B/stainless Product Manual

4

Product Overview

Fig. 1: Product overview
The ABB SmartTouch
communication system and the display and operation of standard KNX and free@home
functions (See "Overview of KNX functions" on page 28 or Chapter 8.2.1 "Parameter settings of
panel" on page 52). It has a capacitive touchdisplay with a resolution of 1280 x 800 (IPS
display).
The touch panel is linked with both bus systems, the ABB i-bus
free@home ® and the ABB-Welcome
power for the device is supplied via the ABB-free@home
that at least one ABB-Welcome
System Access Point or one additional power supply is to be provided to ensure the power
supply for the touch panel.
If the touch panel connected with the ABB-free@home
of the System Access Point is taken over (e.g. the number of the control elements). If the touch
panel is connected with the ABB-Welcome
on the rear side of the panel. It is also possible to operate the touch panel without a connection
to the ABB-Welcome
WLAN. This means that an additional power supply is to be provided to ensure the power
supply for the touch panel.
Product manual 2CKA001473B5343
® serves as indoor video station for the ABB-Welcome
® bus. The audio/video signals are transmitted and the
®
central control system or alternatively oneABB-free@home
® bus, the configuration is made via the rotary switch
® bus. The connection to the door communication system is then made via
Product Overview
® door
®
KNX or alternately ABB-
® ®
or ABB-Welcome bus. This means
® System Access Point, the configuration
®
│25