Access To; Return To The Previous Page - ABB SmartTouch B/stainless Product Manual

12.3.3 Access to pages
There is the option of protecting applications or access to pages (e.g. on operating pages)
against unauthorized access with a password (PIN code).
This is displayed by means of a closed padlock at the top right screen edge of the dashboard.
The entry of the PIN code input is opened by tapping on this icon. After entering the PIN code
and confirming it, all functions of the page or application can be accessed.
The PIN code level can be specified via the commissioning software (see chapter 9.6.1 "Basic
settings (system settings) of the panel" on page 77). Here it can also be decided whether the
end user can change the PIN code directly on the device. This application can also be protected
by a PIN code.
Notice
If an application or a page has been opened by the user in the device, all other
applications of this level can be accessed.
The renewed disabling of the application takes place automatically after a few
seconds of non-use, it can, however, also be carried out manually with a logout
of the user. For this the opened padlock in the bottom bar is used.
12.3.4

Return to the previous page

The previous page can be opened again by swiping to the left.
Product manual 2CKA001473B5343
Operation
│323