Setpoint Settings - Setpoint For Heating And Cooling Comfort; Setpoint Settings - Setpoint For Heating Comfort; Setpoint Settings - Setpoint For Heating Standby; Setpoint Settings - Reduction For Standby Heating By - ABB SmartTouch B/stainless Product Manual

10.24.74 Setpoint settings — Setpoint for heating and cooling comfort
Options:
Specifies the comfort temperature for heating and cooling when people are present.
Notice
This parameter is only available when the "Control function" parameter is set on
"Heating and cooling" or "Heating and cooling with additional stages" and the
"Setpoint for heating comfort = Setpoint for cooling comfort" parameter is
"activated".
10.24.75 Setpoint settings — Setpoint for heating comfort
Options:
Specifies the comfort temperature for heating when people are present.
Notice
This parameter is only available when the "Control function" parameter is set
on "Heating", "Heating with additional stage", "Heating and cooling" or
"Heating and cooling with additional stage" and parameter "Setpoint heating
comfort = setpoint cooling comfort" is set on "deactivated".
10.24.76 Setpoint settings — Setpoint for heating standby
Options:
Specifies the comfort temperature for heating during standby.
Notice
This parameter is only available when the "Control function" parameter is set
on "Heating", "Heating with additional stage", "Heating and cooling" or
"Heating and cooling with additional stage" and parameter "Setpoint for
standby and Eco are absolute values" is set on "activated".
10.24.77 Setpoint settings — Reduction for standby heating by
Options:
Specifies the temperature in heating mode when nobody is present. On devices with a display,
this mode is indicated by the standby icon.
Notice
This parameter is only available when the "Control function" parameter is set on
"Heating", "Heating with additional stage", "Heating and cooling" or "Heating and
cooling with additional stages" and parameter "Setpoint for standby and Eco are
absolute values" is set on "deactivated".
10.24.78 Setpoint settings — Setpoint for heating economy
Product manual 2CKA001473B5343
KNX control elements and application parameters
Setting option between 10 - 40
Setting option between 10 - 40
Setting option between 5 - 45
Setting option between 0 - 15
Application "Internal RTC"
│257