Use Repeat Control - ABB SmartTouch B/stainless Product Manual

1 bit: Random playback commands are sent with 1 bit (0 or 1). The following
-
supplementary parameter is available:
Value for shuffle:
Options: 0
1
The parameter is used to send the the "Value for shuffle" with "0" or "1".
- 1-byte value [0..255]: The value without random playback is sent as a 1-byte unsigned
value. The following supplementary parameter is available:
Value for not shuffle:
Options: 0
1
The parameter is used to send the the "Value for not shuffle" with "0" or "1".
- 1-byte value [0..255]: The value without random playback is sent as a 1-byte unsigned
value. The following supplementary parameter is available:
Value for shuffle:
Options: Setting option from 0 - 255
The parameter is used to send the "Value for shuffle" as absolute value.
Value for not shuffle:
Options: Setting option from 0 - 255
The parameter is used to send the "Value for not shuffle" as absolute value.
1 bit: Random playback commands are sent with 1 bit (0 or 1). The following
-
supplementary parameter is available:

10.14.2 Use repeat control

Options:
– Deactivated: No repetition is enabled. No additional parameters available.
– Activated: The repetition is enabled. The following supplementary parameter is available:
Object type repeat control:
Options:
The parameter is used to specify the size of the communication object for sending
telegrams.
1 bit: Repeat commands are sent with 1 bit (0 or 1). The following supplementary
-
parameter is available:
Value for repeating:
Options:
Product manual 2CKA001473B5343
KNX control elements and application parameters
Deactivated
Activated
1 bit
1-byte value [0 - 255]
0
1
Control element "Audio control"
│194