Ports And Services For Supporting The Main Functionality - ABB SmartTouch B/stainless Product Manual

2.5.1

Ports and services for supporting the main functionality

To support the main functionalities of the device, communication via specific ports and services
must be possible in your local network. Contact your network administrator to set up, if
necessary, the appropriate port sharing.
Attention!
Enabling the port increases the risk of cyber attacks.
– Assign only necessary enabling.
– Regularly check which ports are enabled for which purpose.
In the following table the TCP and UDP services listed on the device are summarized:
Port Service
5222 TCP
5269 TCP
5060/TCP SIP
5060/UDP SIP
5061/TCP SIP-TLS
50602/UDP SIP
2222/TCP Private
2224/TCP Private
8277/TCP Private
Random Private
Port/UDP
Product manual 2CKA001473B5343
Purpose
Service for XMPP client.
Xmpp server
Port 5060/TCP is used by SIP Server Flexisip/0.5.0 (sofia-
sip-nta/2.0).
SIP (Session Initiation Protocol) is a communication protocol
for the introduction of communication sessions between
systems.
The protocol is used mostly in IP Telephony networks /
systems to set up, control, and finish sessions between two
or more systems.
Port 5060/UPD is used by SIP Server Flexisip/0.5.0 (sofia-
sip-nta/2.0).
Port 5061/TCP is used by SIP Server Flexisip/0.5.0 (sofia-
sip-nta/2.0). The use of SSL encryption makes the encryption
of communication sessions possible.
Is used by SIP server STUn.
Is used for b2bsip.
Is used for b2bsip.
Is used for internal process communication of safety storage
components. This port is limited only for local access by
iptables.
The random UDP port is used for the communication of
b2bsip.
Safety
│21