ABB SmartTouch B/stainless Product Manual page 29

Device overview (rear side)
14
13
Fig. 3: Device overview ABB SmartTouch
Po Description
s.
[1] Address of outdoor station
Setting of the address of the standard outdoor station.
[2] Indoor station address
Setting the address of the indoor station.
X10: Setting the tens digits.
■
X1: Setting the ones digits.
■
X100 and X200: setting the hundreds digits
■
(must only be set for ABB-Welcome
[3] Master/slave function
Only one indoor station in each apartment can be set as "Master" (ON=Master).
[4] Terminal resistor
In video installations or mixed audio and video installations, the switch on the last device of
the connection must be set on "RC on" (ON=RC on).
[5] KNX connection /ABB-free@home
[6] Floor call connection
[7] Connection of power input/bus connection
[8] Temperature sensor connection
[9] Binary input connection
[10 USB connection for firmware upgrade (only for factory use)
]
[11 Temperature sensor
]
[12 Loudspeaker
]
[13 Microphone
]
[14 SD card insertion position
]
Product manual 2CKA001473B5343
1
10
9
12 11
® rear side
® systems of type M range)
®
Product Overview
2 3
8 7 6 5
4
│29