Type Of Display Element - Value Display - Measurement Display With Colour Display - ABB SmartTouch B/stainless Product Manual

– 1-byte value [0 - 255]: A status value is sent as 1-byte value without a sign. The following
supplementary parameters are available:
Text x for value [0 - 255]:
Options:
The parameter is used to set the status value at which text x is displayed.
Text x:
Options:
The parameter is used to specify the text that is displayed.
The length of the text is limited to 60 characters.
10.13.7 Type of display element — Value display — Measurement display with colour display
Options:
The parameter is used to specify whether a colour display follows.
For this the communication object is enabled.
– Switching red
– Switching orange
– Switching green
Product manual 2CKA001473B5343
KNX control elements and application parameters
Setting option from 0 - 255
Notice
8 parameters of "Text x at value [0 - 255]" are available which can be set as
required.
<Text>
Notice
8 parameters of "Text x" are available which can be set as required.
Deactivated
Activated
"Display" control element
│174