Program 11 : System Numbering; System Numbering - NEC Electra Elite IPK II Programming Manual

Level:
IN
Description
Use
numbering plan. The numbering plan assigns the first and second digits dialed
and affects the digits an extension user must dial to access other extensions
and features, such as service codes and trunk codes. If the default numbering
plan does not meet the site requirements, use this program to tailor the system
numbering to the site.
Changing the numbering plan consists of three steps:
Step 1: Enter the digit(s) you want to change
You can make either single or two digit entries. In the Dialed Number column in
the Table 2-2 System Numbering Default Settings on page 2-33
rows (e.g., 1X) are for single digit codes. The remaining rows (e.g., 11, 12,
etc.) are for two digit codes.
J
J
Electra Elite IPK II Programming Manual

Program 11 : System Numbering

Program 11-01 : System Numbering
Improperly programming this option can adversely affect system
operation. Make sure you thoroughly understand the default numbering
plan before proceeding. If you must change the standard numbering, use
the chart for Table 2-2 System Numbering Default Settings on
page 2-33 to keep careful and accurate records of your changes.
Before changing your numbering plan, use the PC Program or Web PC
Program to make a backup copy of your system data.
Entering a single digit affects all the Dialed Number entries beginning with
that digit. For example, entering 6 affects all number plan entries beginning
with 6. The entries you make in step 2 and step 3 below affect the entire
range of numbers beginning with 6. (For example, if you enter 3 in step 2
the entries affected would be 600-699. If you enter 4 in step 2 below, the
entries affected would be 6000-6999.)
Entering two digits lets you define codes based on the first two digits a user
dials. For example, entering 60 allows you to define the function of all codes
beginning with 60. In the default program, only * and # use 2-digit codes. All

11-01 : System Numbering

to set the system's internal (Intercom)
C A U T I O N !
P r o g r a m
11
table, the nX
2 - 31