Add / Delete Digit For E&M Tie Line - NEC Electra Elite IPK II Programming Manual

Electra Elite IPK II
Level:
IN
Description
Use Program 34-06 : Add / Delete Digit for E&M Tie Line to set digits that the
system should add or delete for Tie Lines.
J
J
Input Data
Feature Cross Reference
J
Electra Elite IPK II Programming Manual
34-06 : Add / Delete Digit for E&M Tie Line
Delete Digit
Some Tie Line networks pass the location number and extension number to the
remote side. This program allows the system to ignore such numbers for a call.
If individual extensions do not want to receive an incoming call, you could delete all
of the digits including the extension number.
Add Digit
If a Tie Line network requires additional digits to reroute the call to a location, the
digits for the location can be added to the received digits.
Incoming Trunk Group Number
Item
No.
01 Delete Digit
02 Additional Dial Digits
Conditions
None
Tie Lines
Program 34 : Tie Line Setup
Item Input Data
0~255
(255 = delete all digits)
Up to 4 digits
Document Revision 1
001~100
Default
0
No Setting
2 - 331