NEC Electra Elite IPK II Programming Manual page 430

Electra Elite IPK II
Item
No.
03
04
Feature Cross Reference
J
Electra Elite IPK II Programming Manual
Additional Data
For the Service Type selected in 44-02-02, enter
the additional data required.
1: Delete Digit = 0~255
H
(255 = Delete All Digits)
2: [Program 44-01 : 0]
H
ARS/F-Route Table Number = 0~500
(0 = No Setting)
Refer to Program 44-05.
[Program 44-01 : 1]
ARS/F-Route Select Table Number = 0~500
(0 = No Setting)
Refer to Program 44-04.
3: Dial Extension Analyze Table Number =
H
0~4 (0 = No Setting)
Refer to Program 44-03.
Dial Tone Simulation
If enabled, this option sends dial tone to the calling
party once the routing is determined. This may be
required if the central office at the destination does
not send dial tone.
Conditions
None
Automatic Route Selection (ARS)
Item
Document Revision 1
Input Data
1: Delete Digit = 0~255
(255 : Delete All Digits)
2: 0~500
(0 = No Setting)
3: Dial Extension Analyze
Table Number = 0~4
(0 = No Setting)
0 = Off
1 = On
Default
0
0
2 - 395