Slot Control - NEC Electra Elite IPK II Programming Manual

Document Revision 1
Level:
IN
Description
(This program is available only via telephone programming and not through PC
Programming).
Use Program 90-05 : Slot Control to reset or delete (uninstall) circuit boards (slots
1~24).
Delete allows you to completely uninstall the
want to remove an
assignments. If a different type of interface ETU is being installed into a slot
previously used (e.g., changing from a SLI to an ESI
(option 1) first before installing the new interface ETU.
Reset allows you to send a reset code.
Input Data
Feature Cross Reference
None
2 - 542
Program 90 : Maintenance Program
and plug it into a different slot - and still retain the port
ETU
Menu Number
Item
No.
01
Conditions
When you delete or reset a ETU, you must first remove it from its slot then run
H
Program 90-05. When reusing the slot for another ETU, you must plug the ETU in
or reset the system before the system will use the slot again.
You might want to do this if you
ETU.
Item Input Data

Slot Control

Slot Number (1~24)
Program 90 : Maintenance Program
Electra Elite IPK II
90-05 : Slot Control
, the slot should be deleted
ETU)
1 = Delete
2 = Reset