Dss Console Key Assignment - NEC Electra Elite IPK II Programming Manual

Electra Elite IPK II
Level:
SA
Description
Use Program 30-03 : DSS Console Key Assignments to customize the key
assignments for 60-button DSS Consoles. A DSS Console key can have any function
up to four digits long (e.g., extension number or Service Code).
To prevent lamping problems when reassigning DSS Console keys, it is
recommended that you clear an extension's programmed key before reassigning it
[Enter key to be cleared + 00 or
assignments and upload the change to the system before proceeding.)] Without
clearing an extension key first, the DSS Console may not show the correct lamping,
although the DSS function works correctly.
If you are programming the system from the extension to which the DSS Console is
connected, either by phone or using the Web or PC Program, you may need to unplug
the DSS and plug it back in to reset the console's lamping.
Input Data
Index 1
Index 2
Item
No.
01
Electra Elite IPK II Programming Manual
Program 30 : DSS/DLS Console Setup

30-03 : DSS Console Key Assignment

DSS Console Number
Key Number
01~60 0~99 (General Functional Level)
00 ~
,
Functional Level)
0 0 (If using Web or PC Programming, delete the key
,
Function Number
99 (Appearance
,
Document Revision 1
01~32
Additional Data
Refer to Function Number
List on the following pages.
2 - 297