System Options For Single Line Telephones - NEC Electra Elite IPK II Programming Manual

Document Revision 1
Level:
IN
Description
Use Program 20-03 : System Options for Single Line Telephones to set up
various options for single line telephones.
Input Data
Item
No.
01
02
03
2 - 154
Program 20 : System Option Setup

20-03 : System Options for Single Line Telephones

Item
SLT Call Waiting Answer Mode
For a busy single line (500/2500 type)
telephone, set the mode used to answer a
camped-on trunk call.
For ESL sets, enabling this option (1) allows
the user to dial Service Code for Voice Mail
Conversation Record.
Ignore Received DP Dial on DTMF SLT Port
Use this option to define whether the system
should receive dial pulse and DTMF signals
(0) or ignore dial pulse and only accept DTMF
signals (1).
SLT DTMF Dial to Trunk Lines
Type 0: The system keeps the digits
H
dialed by the single line telephone on a
trunk in a buffer. After all the digits have
been received, the system sends all the
digits to the trunk. If the time space
between digits is longer than the timer in
Item 4, the system considers all digits
received.
Type 1: The system passes the received
H
digits from the single line telephone to the
trunk immediately. If the single line
telephone has a Last Number Dial key
without a pause, this key may not be able
to use the Last Number Dial key with the
Type 1 setting.
When using a third-party external paging
device, set this option to 1. In addition, set
Program 20-03-04 to 1. These programs must
be set in order for DECT Wireless users to be
able to break dial tone on an analog trunk that
is used for paging.
Electra Elite IPK II
Input Data Default
0 = Hookflash
(Hooking)
1 = Hookflash +
Service
Code 654
0 = Do Not
Ignore (No)
1 = Ignore (Yes)
0 = Receive all
dialed data,
before
sending (All)
1 = Direct
through out
(Direct)
Program 20 : System Option Setup
Related
Program
0 11-12-47
0 15-03-01
0 20-03-04