NEC Electra Elite IPK II Programming Manual page 447

Document Revision 1
Input Data
Item
No.
03
04
05
2 - 412
Item
Subscriber Message Length
(Subs Msg Length)
Use this option to set the maximum
length of recorded messages for:
Subscriber Mailbox users dialing RS
H
to record and send a message.
Extension users leaving a message
H
in a Subscriber Mailbox.
Outside Automated Attendant callers
H
accessing a mailbox via a GOTO
command and then dialing RS to
record and send a message.
Subscriber Mailbox Greetings.
H
Announcement Messages.
H
Call Routing Mailbox Instruction
H
Menus.
The length of a Conversation

Record is 10 times the
Subscriber Message Length.
Since the Conversation Record
time cannot exceed 4095
seconds, any settings in
Subscriber Message Length
larger than 409 has no effect on
the length of recorded
conversations.
Non-Subscriber Message Length
(Mbox Msg Length)
Use this option to set the maximum
length of recorded messages for:
Automated Attendant callers leaving
H
a message or Quick Message in a
Subscriber Mailbox.
Outside callers transferred by an
H
extension user to a Subscriber
Mailbox.
Message Backup/Go Ahead Time
(Msg Bkup/Adv Time)
Use this option to set the backup/go
ahead interval. This interval sets how far
IPK II In-Mail backs up when a user dials
B while listening to a message. This
interval also sets how far IPK II In-Mail
jumps ahead when a user dials G while
listening to a message.
Input Data
1~4095 (sec) 120 (sec)
1~4095 (sec) 120 (sec)
1~60 (sec) 5 (sec)
Electra Elite IPK II
Default
Program 47 : In-Mail