Program 22 : Incoming Call Setup; System Options For Incoming Calls - NEC Electra Elite IPK II Programming Manual

Level:
IN
Description
Use Program 22-01 : System Options for Incoming Calls to define the

system options for incoming calls.

Input Data
Item
Item
No.
01 Incoming Call
Priority
02 Incoming Call
Ring No Answer
Alarm
03 Ring No Answer
Alarm Time
04 DIL No Answer
Recall Time
05 -- Not Used --
06
DID Ring-
No-Answer Time
07 DID Incoming
Ring Group no
answer timer
Electra Elite IPK II Programming Manual

Program 22 : Incoming Call Setup

22-01 : System Options for Incoming Calls
Input Data Default
0 = Intercom 1
Call
Priority
1 = Trunk Call
Priority
0 = Disable
0
(Off)
1 = Enable
(On)
0~64800 (sec.) 60
0~64800 (sec.) 0
0~64800 (sec.) 20
0~64800 (sec.) 20
Description
Use this option to determine if Intercom
calls or trunk calls have answer priority
when both are ringing simultaneously.
If enabled, an incoming call that rings
longer than the Ring No Answer Alarm
interval (22-01-03), will change to a
unique ring cadence to indicate that the
call has been ringing too long. If
disabled, this will not occur.
If a trunk rings a multiline telephone
longer than this interval, the system
changes the ring cadence. This
indicates to the user that the call has
been ringing too long.
A DIL that rings its programmed
destination longer than this interval
diverts to the DIL No Answer Ring
Group (set in Program 22-08).
In systems with DID Ring-No-Answer
Intercept, this interval sets the Ring-No-
Answer time. This interval is how long a
DID call rings the destination extension
before rerouting to the intercept ring
group.
P r o g r a m
22
Related
Program
15-02-22
22-01-03
22-01-04
22-01-02
22-12
2 - 225