Dial Analysis Table For Ars/Lcr - NEC Electra Elite IPK II Programming Manual

Electra Elite IPK II
Level:
IN
Description
Use Program 26-02 : Dial Analysis Table for ARS/LCR to set pre-transaction tables
for selecting Automatic Route Selection (ARS).
J
J
Input Data
Item
Item
No.
01
Dial
02 ARS Service Type
03 Additional Data / Service
Number
04 ARS Class of Service
05 Dial Treatment for ARS
Electra Elite IPK II Programming Manual

26-02 : Dial Analysis Table for ARS/LCR

Service Type 1 (Route to Trunk Group Number) - The number routes to a trunk
group.
Service Type 2 (F-Route Selected) - The number is controlled by the F-Route table.
Dial Analysis Table Number
Dial Digits (16 digits maximum)
1-9, 0, , #, or for wild character (Press line key 1)
,
0 = No Service (None)
1 = Route to Trunk Group
2 = Select F-Route Access
If Service Type 1 (in 26-02): Select Trunk Group
Number (0~100, 0= No Route)
If Service Type 2 (in 26-02):
F-Route Time Schedule Not Used = 0~500
(F-Route Table Number).
Refer to Program 44-05 : ARS/F-Route Table on
page 2-399.
F-Route Time Schedule Used = 0~500
(F-Route Selection Number).
Refer to Program 44-04 : ARS/F-Route Selection
for Time Schedule on page
Program 26 : ARS Service
Input Data
2-398).
0~16
0~15
Document Revision 1
1~200
Related
Default
Programming
No
Setting
0
0 44-04
44-05
0
0
2 - 283