Trunk Control - NEC Electra Elite IPK II Programming Manual

Electra Elite IPK II
Level:
SA
Description
(This program is available only via telephone programming and not through PC
Programming).
Use Program 90-06 : Trunk Control is used for the trunk maintenance. Busy Out lets
you block a
Once busied out, none of the ports on the
calls, however, are not torn down.
Input Data
Feature Cross Reference
None
Electra Elite IPK II Programming Manual
Program 90 : Maintenance Program
from placing outgoing calls (just like placing the
ETU
Menu Number
Item
No.
01
Conditions
None
can be used for new calls. Existing
ETU
Item Input Data

Trunk Control

Trunk Port Number:
Document Revision 1
90-06 : Trunk Control
switch down).
ETU
0 = Set Busy Out
1 = Reset/Release Busy Out (idle)
001~200
2 - 543