Table of Contents
Advertisement
2. Enter the following command, where the number 1 or 2 indicates the PC-card slot:
set optional-disk device-id <1 | 2> off
3. Enter the following command:
halt or reboot
You can now remove the flash-memory PC card.
Caution
When you remove the card, hold the flash-memory PC card while you push the eject
button to prevent the card from ejecting too quickly.
Transferring Files with the Flash-Memory PC Card
You can copy configuration files between the internal compact flash memory and the flash-
memory PC card. If you do not use Nokia Network Voyager to configure the flash-memory PC
card as an optional disk, you must mount the flash-memory PC card when you insert it in the
PC-card slot, and you must unmount the flash-memory PC card before you remove it. You do
not need to reboot or shut down the system if you manually mount and unmount the
flash-memory PC card.
To transfer Nokia IPSO images or configuration files to the flash-memory PC
card:
1. Insert the flash-memory PC card into the IP1200 Series appliance.
2. Connect to the IP1200 Series appliance by using a console or terminal connection.
3. Mount the flash-memory PC card by using the following command:
mount /dev/wd1 /cdrom
The /cdrom directory is a default directory in Nokia IPSO for mounting media.
4. Use the cp command to transfer Nokia IPSO images or configuration files to and from the
flash-memory PC card.
For example, to copy the current Nokia IPSO image from the compact flash to the flash-
memory PC card, use the following command:
cp /image/current/ipso.tgz /cdrom/
5. Use the following command to unmount the flash-memory PC card before you eject it:
umount /cdrom
6. To remove the card, slowly push the eject button located to the left of the card.
Caution
Hold the flash-memory PC card while you push the eject button to prevent the card
from ejecting too quickly.
IP1220 and IP1260 Security Platforms Installation Guide
All manuals and user guides at all-guides.com
Installing a PC Card
95
Advertisement
Table of Contents
