Transferring Files With The Flash-Memory Pc Card - Nokia IP200 Series Installation Manual

Caution
When you remove the card, hold the flash-memory PC card while
you push the eject button to prevent the card from ejecting too
quickly.
Transferring Files with the Flash-Memory PC
Card
You can copy Nokia IPSO images or configuration files between the internal
compact flash memory and the flash-memory PC card. If you do not use
Nokia Network Voyager to configure the flash-memory PC card as an
optional disk, you must mount the flash-memory PC card when you insert it in
the PC-card slot, and you must unmount the flash-memory PC card before
you remove it. You do not need to reboot or shut down the system if you
manually mount and unmount the flash-memory PC card.
To transfer Nokia IPSO images or configuration files to the
flash-memory PC card
1. Insert the flash-memory PC card into the IP200 appliance.
2. Connect to the IP200 appliance by using a console or terminal
3. Mount the flash-memory PC card by using the following command:
4. Use the cp command to transfer IPSO images or configuration files to and
Nokia IP200 Series Security Platform Installation Guide
connection.
mount /dev/wd1 /cdrom
The /cdrom directory is a default directory in IPSO for mounting media.
from the flash-memory PC card.
For example, to copy the current IPSO image from the compact flash to
the flash-memory PC card, use the following command:
cp /image/current/ipso.tgz /cdrom/

Transferring Files with the Flash-Memory PC Card

61