Monitoring The Power Supply; Replacing Motherboard Batteries - Nokia IP1220 Installation Manual

7
Installing and Replacing Components Other than Network Interface Cards (NICs) and Accelerated Data Path
5. Use the handles to gently pull the power supply out of the chassis.
6. Insert the new power supply into the empty bay.
7. Replace the grounding lugs.
8. Reinstall the two retaining screws.
9. Turn on power to the power supply.

Monitoring the Power Supply

You can monitor the status of the Nokia IP1200 Series appliance power supply with Nokia
Network Voyager. Similarly, you can also use the command-line interface (CLI). For
information about the CLI, see the CLI Reference Guide.
To monitor the power supply by using Nokia Voyager
1. Log on to the appliance by using Network Voyager.
2. Click Monitor.
3. Click Hardware Monitoring > System Status.
To the right of the Power Supply link, the status indicator is green for normal and red for
fault.
4. For more detailed information about the power supply status, click Power Supply.
For more information about Voyager, see the Nokia Network Voyager Reference Guide or use the
Network Voyager inline help.

Replacing Motherboard Batteries

This section describes how to change the CMOS battery on the motherboard of the Nokia
IP1200 Series appliance.
110
All manuals and user guides at all-guides.com
IP1220 and IP1260 Security Platforms Installation Guide
00317.1