Transferring Files With The Flash-Memory Pc Card - Nokia EM5400 Installation Manual

6
Installing PC Cards
2. Enter the following command, where the number 1 or 2 indicates the
3. Enter the following command:
You can now remove the PC card.
Caution
When you remove the card, hold the PC card while you push the
eject button to prevent the card from ejecting too quickly.
Transferring Files with the Flash-Memory PC
Card
You can copy Nokia IPSO images or configuration files between the internal
compact flash memory and the flash-memory PC card. If you do not use
Nokia Network Voyager to configure the flash-memory PC card as an
optional disk, you must mount the PC card when you insert it in the PC-card
slot, and you must unmount the PC card before you remove it. You do not
need to reboot or shut down the system if you manually mount and unmount
the PC card.
To transfer Nokia IPSO images or configuration files to the
flash-memory PC card
1. Insert the PC card into the EM5400 appliance.
2. Connect to the EM5400 appliance by using a console or terminal
56 Nokia EM5400 IP Security Platform (IP260 and IP265 Appliances) Installation Guide
EM5400 IP Security Platform includes IP260, IP265, 50i, 50s Appliances
PC-card slot:
set optional-disk device-id <1 | 2> off
or
halt reboot
connection.