Table of Contents
Advertisement
7
Installing and Replacing Components Other than Network Interface Cards (NICs) and Accelerated Data Path
7. Place the screws through the standoff holes on the card and into the standoffs on the
motherboard.
8. Turn each screw clockwise to attach the card to the standoffs.
Make sure that all four standoff connections are properly aligned before tightening the
screws completely.
9. To secure the connections, tighten the screws firmly, but do not overtighten.
10. Slide the chassis tray assembly back into the appliance and resecure the four retaining
screws.
Reseating the chassis tray assembly automatically restores power to the appliance.
11. Configure your software to use hardware acceleration by following the instructions in
"Configuring Software to Use Hardware Acceleration"
Configuring Software to Use Hardware Acceleration
The Nokia encryption accelerator software package is part of the Nokia IPSO operating system,
so the appliance automatically detects and configures the Nokia encryption accelerator card.
For the Nokia IP1200 appliances, SecureXL is on by default. After you install the Nokia
encryption accelerator card and reboot the appliance, SecureXL automatically uses the Nokia
encryption accelerator card for encryption acceleration. If you do not want to use SecureXL for
encryption acceleration, use the Check Point cpconfig utility to disable SecureXL.
You can also configure the IP1200 appliances to use the Nokia encryption accelerator card for
IKE acceleration. When you enable IKE acceleration, the Nokia encryption accelerator card
performs cryptographic operations for IPsec tunnel negotiation.
To enable IKE acceleration
1. From the Network Voyager home page, click Security and Access Configuration, then click
IKE Acceleration.
For information about how to access Network Voyager and the related reference materials,
see
"Using Nokia Network Voyager"
2. On the IKE Acceleration page, click Register the module.
3. Click Apply.
106
All manuals and user guides at all-guides.com
on page 44.
IP1220 and IP1260 Security Platforms Installation Guide
Screw
Encryption accelerator card
Standoff hole
Motherboard standoff
on page 106.
Advertisement
Table of Contents
