Before You Begin - Nokia IP1220 Installation Manual

Caution
The Nokia IP1200 Series appliance power supply might be hot to the touch when the
power supply unit is plugged in to an AC power source and the power supply is not
turned on.
Power supply A
Power supply B

Before You Begin

To replace a power supply, you need:
Physical access to the IP1200 Series appliance.
Phillips-head screwdriver.
Replacement power supply and appropriate documentation.
To replace a power supply
1. Locate the power supply and the two screws that secure it on the back of the IP1200 Series
appliance.
2. Turn off the power to the power supply to be removed.
3. Loosen the two retaining screws.
4. Remove the grounding lugs.
IP1220 and IP1260 Security Platforms Installation Guide
All manuals and user guides at all-guides.com
AC power receptacle
Integrated power supply
cooling fans
Installing or Replacing a Power Supply
Power supply switches
00308a
109