Canon DADF-G1 Service Manual page 67

CHAPTER 3 MECHANICAL SYSTEMS
6) Disconnect the connector [4] of the belt
motor clock sensor (S10).
7) Mark the position of the belt motor unit
[5] on the machine; then, remove the
three screws [6].
8) Detach the timing belt [7] from the side
of the feed belt drive roller [8], and de-
tach the belt motor unit [5].
3-14
COPYRIGHT© 2000 CANON INC.
[4]
F03-203-03
[6]
[5]
F03-203-04
[7]
[8]
[5]
F03-203-05
CANON DADF-G1 REV.0 OCT. 2000