Canon DADF-G1 Service Manual page 61

CHAPTER 3 MECHANICAL SYSTEMS
4) Fully turn the original detecting volume
[6] in the direction of the arrow; then,
turn it in the opposite direction over a
distance of half a tooth as shown in the
figure.
5) Holding the original width detecting
volume [6] as shown in step 4), mount
it to the original tray [7] by securing it
with two screws [8]; then, connect the
connector [9].
6) Engage the side guide lock freed in step
1), and execute original width detecting
volume adjustment. (For details of in-
structions, see p. 5-13.)
3-8
Half a
tooth
[9]
COPYRIGHT© 2000 CANON INC.
[6]
F03-102-06
[7]
[6]
F03-102-07
CANON DADF-G1 REV.0 OCT. 2000
[8]