Adjusting The Separation Belt Pressure - Canon DADF-G1 Service Manual

CHAPTER 5 TROUBLESHOOTING

1.1.4 Adjusting the Separation Belt Pressure

a. Outline
If originals tend to move askew because
of wear on the separation belt or the feed
roller in the field, adjust the pressure of the
separation belt.
Be sure to perform the following adjust-
ments when replacing the separation belt or
the feed roller:
b. Before Starting the Work
1) Prepare a test strip for measuring the
feed power: cut an A4 or LTR sheet of
paper (64 or 80 g/m
of about 70 mm, attach a length of tape
to both edges of the strip, and open a
hole.
5-10
2
) to obtain a strip
COPYRIGHT© 2000 CANON INC.
Separation roller
Adjusting screw
Separation
belt pressure
F05-101-21
1/3
1/3
1/3
Vertical direction
Copy paper (A4)
10 mm (approx.)
Open a hole.
35mm
20 mm (approx.)
300 mm (approx.)
F05-101-22
Gauge spring
Separation
belt
Feeding
power
Test strip
Feed roller
70 mm
(approx.)
Put tape on both sides.
70 mm
(approx.)
CANON DADF-G1 REV.0 OCT. 2000