Removing The Feed Motor Unit - Canon DADF-G1 Service Manual

5) Disconnect the connector [5] of the up-
per cover sensor (S4).
6) Remove the two mounting screws [6],
and detach the pickup motor unit [7].

2.2 Removing the Feed Motor Unit

1) Remove the pickup motor unit.
2) As necessary, remove the tie-wraps.
3) Disconnect the connector J11 [2] of the
DADF controller PCB [1].
COPYRIGHT© 2000 CANON INC. CANON DADF-G1 REV.0 OCT. 2000
CHAPTER 3 MECHANICAL SYSTEMS
[5]
[6]
[7]
F03-201-03
[1]
F03-202-01
[6]
[2]
3-11