Canon DADF-G1 Service Manual page 48

Jam type
Delivery Delivery failure
DADF open
Upper cover open MS2, S4 When the host copier is at rest (e.g., after running out 92H
Recirulating
lever idle rotation
1. Response to a Jam
2. Jam Rest
As a rule, the detection of a condition caused by the first original is identi-
fied as "improperly placed original," and jams are identified starting with
REF.
the second original.
COPYRIGHT© 2000 CANON INC.
Sensor
S3, S6 During delivery in bottom separation pickup mode,
the stop mechanism has failed (e.g., the original that
has been picked up is longer than the one being
delivered).
MS1 When the host copier is at rest (e.g., after running out 91H
of paper), the machine has been opened.
of paper), the upper cover has been opened.
S13 During original pickup, the recirulating lever has
moved away from the existing original.
The machine will immediately stop its operation as soon as any of the
jams shown in the foregoing table is detected.
In the case of a pickup delay jam, the machine will be reset when the
originals are removed from the original tray. Otherwise, remove the
originals from the original tray, remove the jam from inside the ma-
chine, and open and close the machine to reset it.
CANON DADF-G1 REV.0 OCT. 2000
CHAPTER 2 OPERATIONS AND TIMING
Description
T02-209-03
Code
8AH
93H
2-31