2.3 Belt Motor Unit
2.3.1 Removal
1) Detach the machine from its host copier.
2) Remove the feed motor unit.
3) As necessary, remove the tie-wraps.
4) Remove the four screws [3], and detach
the right hinge unit [4].
5) Disconnect the connectors J6 [1], J7
[2], and J13 [3] of the DADF controller
PCB.
COPYRIGHT© 2000 CANON INC.
CANON DADF-G1 REV.0 OCT. 2000
CHAPTER 3 MECHANICAL SYSTEMS
[3]
[3]
F03-203-01
[3]
[1]
[2]
F03-203-02
[4]
[3]
3-13