Ejecting An Optical Disc (Cd Or Dvd); Using The Dvd Drive When The Equipment Is Installed Vertically - Hitachi HF-W2000 58 Instruction Manual

2. OPERATION

2.6.2 Ejecting an optical disc (CD or DVD)

1. Confirm that the lamp is not on or flashing (the drive is operating).
2. Press the eject button gently to open the disc tray.
3. Pick up the CD or DVD.
NOTE
• When writing to a CD or DVD, use the OS to eject the disc. If you press the eject button, writing to the disc
might fail.

2.6.3 Using the DVD drive when the equipment is installed vertically

1. Press the eject button to eject the disc tray from the DVD drive.
2. While holding the disc tray with your left hand, set a CD or DVD on the disc tray with your right hand.
3. Remove your left hand from the disc tray.
4. Push the disc tray to load the disc into the DVD drive.
5. When you remove the CD or DVD, remove the disc without applying excessive force to the disc.
2-6