Figure 6-3 Removing The Pci Cover - Hitachi HF-W2000 58 Instruction Manual

(2) Information about extension boards
(a) Types of extension boards
This equipment has a total of three expansion slots (two PCI Express slots and a PCI slot).
•
The PCI Express slots are compliant with PCI Express Base Specification Revision 2.0.
• The PCI slot is compliant with PCI Local Bus Specification Revision 2.1.
Expansion slot
Slot 3
Slot 2
Slot 1
#1: Although a PCI Express x16 connector is used, the internal connection is equivalent to PCI Express x4.
(b) Size of extension boards
The board sizes (length × height) in the PCI Express and PCI specifications are as follows (heights include the
connectors):
● Do not spray detergent directly onto the keyboard or spill liquid detergent on it.
● PCI Express specifications:
• Short size: 167.65 × 111.15 mm
● PCI specifications:
• Short size: 174.63 × 106.68 mm
(3) Installing an extension board
[1] Follow the instructions in 6.3.3 Installing and removing the cover of the main unit to remove the cover of the
main unit.
[2] Remove the two screws on the rear of the equipment, and then remove the PCI cover.
Supported extension boards
PCI short size
PCI Express x4, full height, short size
PCI Express x16, full height, short size

Figure 6-3 Removing the PCI cover

6-9
6. INSPECTION AND MAINTENANCE
#1
[2] PCI cover
[2] Screws (2)