Precautions - Hitachi HF-W2000 58 Instruction Manual

PRECAUTIONS

1. Precautions About the Equipment
● Before moving this equipment, shutdown the OS, unplug the power cord, and wait for at least one
minute. Not doing so might cause HDDs and other devices to fail.
● When transporting or carrying the equipment, pack it by using the dedicated container (the container
and packing materials used when the equipment was delivered). Using another container or other
packing materials might damage the equipment.
● Do not use the dedicated container to transport or carry the equipment if the container has been
damaged or broken. Doing so might damage the equipment.
● Due to the characteristics of the inrush current restraint method that is used with this equipment,
inrush currents might increase more than usual if the power is turned on before the power supply unit
has sufficiently and naturally cooled after the power is turned off. After turning off the power, wait at
least one minute before turning on the power again. If you do not do so, inrush currents might affect
the breaker connected to the equipment and the life span of the equipment itself.
(1) Transporting the equipment
Required actions
• When transporting or carrying the equipment, pack it by using the dedicated container (the container and packing
materials used when the equipment was delivered). When transporting or carrying the equipment in a chassis,
protect the equipment so that any vibrations and shocks the equipment is subjected to are within the provided
specifications.
• Keep the dedicated container (the container and packing materials used when the equipment was delivered). You
can use the dedicated container later when transporting or carrying the equipment.
(2) Interface cables
Precautions
• Do not pull on a cable by using excessive force.
• In order to meet EMC standards (FCC, CE, VCCI), use shielded cables for the interface cables connected to the
equipment (the display interface cable, keyboard interface cable, and mouse interface cable).
Required actions
• Route the cables neatly and orderly alongside the equipment so that the cables do not catch on hands or feet. If the
power cord is disconnected during operation of the equipment and power is lost, crucial data stored on the hard
disk might be lost.
NOTICE
C-1