SAFETY INSTRUCTIONS (Continued)
• When installing or removing an HDD or SSD, be careful not to cut your fingers on the protrusions.
• When installing or removing a DVD drive, be careful not to cut your fingers on the protrusions.
• This equipment uses a lithium battery. When replacing the lithium battery, use a battery specified
by the manufacturer. Failure to do so might result in an explosion, a fire, a burst battery, heat
generation, a liquid spill, or gas generation.
• Install the battery by using the correct polarity. Using the wrong polarity might cause an abnormal
reaction, such as charging or shorting, resulting in a liquid spill, heat generation, or a burst battery.
• When installing or removing a jumper socket, do not directly touch parts inside the equipment with
your hands. Such parts are hot, and touching them might result in burns. In addition, touching such
parts might damage the parts or result in equipment failure.
S-9
(Page 6-17)
(Page 6-19)
(Page 6-22)
(Page 6-24)