6.3.7 Installing or removing a DVD drive
When installing or removing a DVD drive, be careful not to cut your fingers on the
protrusions.
Do not apply excessive force to the connector of the DVD drive or to the top of the DVD drive. If
you do so, the DVD drive might fail.
(1) Before installing or removing a DVD drive
•
Before starting work, see 6.3.2 Before installing or removing components.
(2) Removing a DVD drive
[1] Follow the instructions in 6.3.3 Installing and removing the cover of the main unit to remove the cover of the
main unit.
[2] Remove the two screws securing the DVD drive to the equipment. When removing the screws, be careful to
avoid dropping them.
[3] Push the DVD drive gently towards the front of the equipment, and remove the DVD drive connector from
the DVD drive.
[4] Remove the DVD drive from the equipment.
[2] Securing screws (2)
(3) Installing a DVD drive
Follow the procedure described in (2) Removing a DVD drive in reverse to install a DVD drive.
Front of the equipment
DVD drive
Figure 6-8 Removing the DVD drive
CAUTION
NOTICE
[4]
6-17
6. INSPECTION AND MAINTENANCE
[3] DVD drive connector