Table of Contents
Advertisement
7. RESTORING THE FACTORY-SHIPPED CONDITION USING A RECOVERY DVD
CHAPTER 7 RESTORING THE FACTORY-SHIPPED CONDITION
USING A RECOVERY DVD
The recovery DVD contains an image file created for the hardware configuration
at the factory shipment. If the hardware configuration has changed from the one
at the factory, the OS may not start after restoration work. Remove all external
storage devices to resume the hardware configuration at the factory shipment
before you perform restoration work using the recovery DVD. (Excludes the DVD
drive connected to read the recovery DVD)
When the recovery DVD is used, all data in the system drive is deleted. Back up
the data beforehand as required.
This chapter describes the following procedure:
・The procedure to restore the system drive back to the factory-shipped conditions when you
discontinue the system you have built.
< NOTE >
It is necessary to prepare an external optical disk drive with USB connection (a
drive capable of reading DVD media (hereinafter referred to as DVD drive)).
NOTICE
7-1
Advertisement
Table of Contents
