7. RESTORING THE FACTORY-SHIPPED CONDITION USING A RECOVERY DVD
7.
If you click Yes in the confirmation window for the settings of the drive restoration, the drive restoration
process starts. Progress appears in the [Status] box.
The following figure is an example when using two recovery DVDs.
Note:
If you select Only the system and boot partition in the selection window for the drive restoration
option, the boot partition is formatted before the restoration process begins. Formatting the partition
might take several minutes. (The time required for formatting depends on the size of the boot
partition.) During the formatting process, Preparing Recovery appears in the [Status] box.
7-8