Hitachi HF-W2000 58 Instruction Manual page 133

5. SPECIFICATION
Top
Setting item
menu
Chipset
ECC Support
LAN 1
LAN 2
LAN 3
Boot
Bootup NumLock State
UEFI Boot
Boot Option Priorities
Save&Exit Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
Default value
Specifies whether to enable or disable the ECC
Enabled function of the memory.
Options: Enabled, Disabled
Specifies whether to enable or disable the applicable
Enabled LAN port.
Options: Enabled, Disabled
Specifies whether to enable or disable the applicable
Enabled LAN port.
Options: Enabled, Disabled
Specifies whether to enable or disable the applicable
Enabled LAN port.
Options: Enabled, Disabled
Specifies whether to turn Num Lock on for the
keyboard upon startup.
On
Options: On, Off
Specifies whether to enable or disable UEFI.
Disabled Options: Disabled, Enabled
1. USB FDD
2. SATA
CD/DVD
3. USB CD
4. DRIVE1
5. DRIVE2
6. PCI SCSI
7. USB HDD
Specifies the priority for devices that start the OS, and
8. Internal
whether to start the OS from a particular device.
Shell
Saves the changes you made in setup to the SPI-ROM,
and then reboots the system.
Discards the changes you made in setup, and reboots
the system by using the configuration that was saved
to the SPI-ROM last.
--
Loads the BIOS default settings.
Default values are loaded but not saved in the SPI-
ROM. If you want to save the default settings in the
SPI-ROM, use Exit Saving Changes.
5-16
(5/5)
Note