Chapter 1 Getting Started; Scope; Installing An Extension Board; Role Of The Operator - Hitachi HF-W2000 58 Instruction Manual

CHAPTER 1 GETTING STARTED

1.1 Scope

This manual is intended for operators of the HITACHI INDUSTRIAL COMPUTER HF-W2000 Model 58/55/50,
and contains information about the operation and maintenance of various devices necessary for operators' routine
use.
After you unpack the equipment, examine the list of delivered items to confirm that all items have been delivered
and that no items are missing or damaged. If any items are missing or damaged, contact one of our sales
representatives.
For information about RAS features, see the following manual:
• HF-W2000 Model 58/55/50 RAS FEATURES MANUAL (manual number WIN-63-0098)

1.2 Installing an Extension Board

Users can supply and install extension boards in this equipment.
For information about the installation procedure for and limitations on extension boards, see 6.3.4 Installing and
removing an extension board.

1.3 Role of the Operator

To use this equipment in good working order over an extended period of time, an operator must take care of the
following:
(1) Setting up replaceable items
• When you set up a replaceable item (such as an HDD or a dust filter), follow the operating procedures for the
device described in the relevant chapters.
(2) Taking the characteristics of the equipment into account
• See 1. Precautions About the Equipment in PRECAUTIONS, and take the necessary actions considering the
characteristics of the equipment.
• The instructions in this manual are the fundamental procedures that operators must follow when using the
equipment. Always follow these instructions.
• For information about how to use the equipment, clean the equipment, and so on, see the relevant chapters.
(3) Keeping the equipment in good condition
When using this equipment, operators must take care of the following:
• Backing up files
See (2) Backing up files under 4. Hard Disk Drives (HDDs) and Solid State Drives (SSDs) in PRECAUTIONS.
• Unplugging the power cord and shutting down the power
See (4) Power supply under 1. Precautions About the Equipment in PRECAUTIONS.
(4) Maintaining the equipment
• For information about maintenance, see 6.1 Daily Inspections and 6.2 Periodic Inspections.
1-1
1. GETTING STARTED